Dual Belt Separator

This unit consists of two driven backed H.T.D belts mounted either side of the conveyor, controlled by a downstream sensor.

Applications include;

1. Reducing line pressure prior to a downstream equipment.
2. Driving containers over a dead plate.
3. Spacing prior to a downstream process.
4. Stopping the flow if a downstream blockage occurs.
5. Driving jars through a turn-over unit.
6. Spacing and positioning of containers for inspection by a Camera whilst in the Belts.

Benefits include:

1. Change Parts are not required.
2. Handles round or non-round bottles or jars.
3. Each motor has a dedicated Inverter.
4. Simple installation to existing Conveyor.
5. Quick and easy replacement of belts.
6. Only requires a single phase supply.

Our range consists of two units, the 2-DBS-20 fitted with 20mm wide belts and the 2-DBS-50 fitted with 50mm wide belts for taller containers.

Rubber or foam backed HTD belts are available.